P
piratefm via CarKB.com
i replaced the cam belt and during so i needed to empty out all the water
from the engine, since reassembly and refilling cooling system i experiance
overheating, heater is cold, seems to have no circulation in the radiator.
As suggested by a reader i parked the car on my steep driveway to "burp" the
cooling system, i spent 40 mins doing so with little or no noticeable result.
Is there something i have done wrong here, the motor is running very well so
belt is installed correctly, is there a trick to this problem, 1996 250T 4WD
station wagon, can anyone offer help here????, thx andy
from the engine, since reassembly and refilling cooling system i experiance
overheating, heater is cold, seems to have no circulation in the radiator.
As suggested by a reader i parked the car on my steep driveway to "burp" the
cooling system, i spent 40 mins doing so with little or no noticeable result.
Is there something i have done wrong here, the motor is running very well so
belt is installed correctly, is there a trick to this problem, 1996 250T 4WD
station wagon, can anyone offer help here????, thx andy