2nd gen impreza a/c lines

[itpoet]

hey all, just bought an 04 impreza outback project car for 700 bucks and im trying to get the a/c up and working just need to know where the lines go for routing. the low is correct but it’s missing the high end.
i attached pics of what’s there. can someone send me an engine bat pic of theirs for high end (part on the a/c compressor)

https://imgur.com/a/jbNUJbj

 

[Ecmbuster]

Parts illustration:

2001-2004 Subaru Outback A/C Refrigerant Discharge Hose 73424AE06A | Subaru Parts Store

2001-2004 Subaru Outback part # 73424AE06A - A/C Refrigerant Discharge Hose

www.subaruparts.com

 

[itpoet]

Parts illustration:

2001-2004 Subaru Outback A/C Refrigerant Discharge Hose 73424AE06A | Subaru Parts Store

2001-2004 Subaru Outback part # 73424AE06A - A/C Refrigerant Discharge Hose

www.subaruparts.com

i’m unable to see where it connects, part 11 in illustration

 

[Ecmbuster]

Part 11 connects from the compressor to the condenser. The condenser is mounted in front of the radiator.
Outback correct?

 

[itpoet]

Part 11 connects from the compressor to the condenser. The condenser is mounted in front of the radiator.
Outback correct?

yes, what does the condenser look like?

 

[Ecmbuster]

Looks like a radiator with 2 pressure lines connected to it. Look at the supplied image.

 

[itpoet]

Looks like a radiator with 2 pressure lines connected to it. Look at the supplied image.

do you see a condenser in these images? i want to double check before ordering one

https://imgur.com/a/H1gq1Re

 

[Ecmbuster]

The radiator is mounted with 2 radiator hoses, closer to the fans. The condenser is mounted in front of the radiator with 2 AC pressure lines connected to it. Your image is rotated and not clear enough. The AC condenser cooling tubes should be vertical. Again, look at the supplied image. there should also be foam pads surrounding the rad and condenser to force air past both components for cooling. The foam should always be installed for air not to bleed past the components.

 

[itpoet]

The radiator is mounted with 2 radiator hoses, closer to the fans. The condenser is mounted in front of the radiator with 2 AC pressure lines connected to it. Your image is rotated and not clear enough. The AC condenser cooling tubes should be vertical. Again, look at the supplied image. there should also be foam pads surrounding the rad and condenser to force air past both components for cooling. The foam should always be installed for air not to bleed past the components.

thank you! looks like the previous owner took it out and never put it back in