Running Wires thru Bulkhead (2k OBW)

[Tim Murray]

I recently purchased an after-market rearview mirror that has a
temperature gauge. The manufacturer suggests installing the temp
probe near the front grill where it can get free flow air. The
problem I am having is trying to figure out how/where to run the wires
through the bulkhead. I would like to avoid drilling holes.

Any tips on where/how to find a good place to run the two wires?

 

[Greg]

I ran my power to my radio amp thru the front fender at the "kick panel".
There is an existing wiring loom going thru there and I fed my wires
alongside them. You'll need a fish wire, or coat hanger, and after removing
the interior panel you'll be able to access the area.