- Joined
- Jan 13, 2022
- Messages
- 1
- Reaction score
- 0
Hello all,
I own a 2003 Subaru legacy sedan 3.0 h6. The car was slamming into drive and reverse from park. This was diagnosed as a transmission mount issue and thus we replaced this. While I had the car apart, I decided to replace the transmission fluid and filter just for the hell of it, the car has roughly 230,000 miles. Once I completed the maintenance, I let the car down and cranked it. Went through the gears but then when I tried to back out the car would not budge. There is no surge when I put this in drive or reverse. I figured I filled the transmission fluid too much and thus went underneath and took the plug off. But nothing came out. I then pulled the dipstick out and all the new fluid was there at the top. Any ideas about what I have done wrong? please HELP
I own a 2003 Subaru legacy sedan 3.0 h6. The car was slamming into drive and reverse from park. This was diagnosed as a transmission mount issue and thus we replaced this. While I had the car apart, I decided to replace the transmission fluid and filter just for the hell of it, the car has roughly 230,000 miles. Once I completed the maintenance, I let the car down and cranked it. Went through the gears but then when I tried to back out the car would not budge. There is no surge when I put this in drive or reverse. I figured I filled the transmission fluid too much and thus went underneath and took the plug off. But nothing came out. I then pulled the dipstick out and all the new fluid was there at the top. Any ideas about what I have done wrong? please HELP