Hi have a 2010 subaru impreza and the valve body in the transmission/sensor is fault which is telling the transmission there is something wrong, apparently you can trick the the valve body / sensor that there is nothing wrong by taking of the transmission sump tracing the wires from the valve and putting a resistor in the line and this works 100% along cheaper than 6k as anyone ever heard of this procedure cheers Dean
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
2010 subura impreza transmission
- Thread starter deanow
- Start date
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.
Similar Threads
Forum statistics
Latest Threads
-
2002 outback rapid power loss
- Started by PToutback
-
Subaru fa/fb series camshaft timing issue
- Started by Ken43
-
Steering slippage
- Started by Jagaba
-
Buying subaru
- Started by Jmdsubout
-
2024 Outback & Car Play - no Messages Notification or Maps Audio
- Started by zeushead01
-
Cvt, 2020 outback xt onox
- Started by gretnasubie
-
Melting mirrors:
- Started by Rosalee Kleinberg
-
Timing Belt tensioner leak
- Started by tmp1k
-
Turning off Radio
- Started by maplewood
-
My Subaru App
- Started by Sailorman3