1986 Subaru GL OBD-1 header

[MYsubaru1986 via CarKB.com]

Does anyone know where the OBD header for a 1986 Subaru GL is located? Also,
anyone know of any good diagnostic software for this car (or older Subarus in
general)? Thanks guys.

 

[Carl 1 Lucky Texan]

Does anyone know where the OBD header for a 1986 Subaru GL is located? Also,
anyone know of any good diagnostic software for this car (or older Subarus in
general)? Thanks guys.

there isn't one - for 83-88 carb models, check here;

http://www.troublecodes.net/Subaru/

lots of help keeping older soobs on the road can also be found at
www.ultimatesubaru.org

Carl

 

[fopetesl]

there isn't one - for 83-88 carb models, check here;

http://www.troublecodes.net/Subaru/

lots of help keeping older soobs on the road can also be found atwww.ultimatesubaru.org

Carl

OK, Carl, thanks for that tip. But is there any for a 93 Legacy Turbo?

 

[MYsubaru1986 via CarKB.com]

Well if that's the case, why is there a list of error codes. It's obviously
the fuel-injection model, so that link won't do ME any good, but there was a
site I went to that gives codes for this car.

 

[Carl 1 Lucky Texan]

OK, Carl, thanks for that tip. But is there any for a 93 Legacy Turbo?

Visit the link and scroll down.

http://www.troublecodes.net/Subaru/


Carl

 

[Carl 1 Lucky Texan]

Well if that's the case, why is there a list of error codes. It's obviously
the fuel-injection model, so that link won't do ME any good, but there was a
site I went to that gives codes for this car.

Well, when I see OBD in caps, I mistakenly thought of the OBDI and OBDII
protocols.
There IS Subaru OEM diagnostics for your injected car. Just continue
scrolling down the page I linked.

Carl

 

[Dave]

Well if that's the case, why is there a list of error codes. It's
obviously
the fuel-injection model, so that link won't do ME any good, but there was
a
site I went to that gives codes for this car.

From the site:
# The connectors are under the steering wheel, to the left of the module on
most models.
# On cerebrated and SPFI injected 89 models, the test connectors are located
on the engine side/driver's side of the firewall.

 

[Dave]

From the site:
# The connectors are under the steering wheel, to the left of the module
on most models.
# On cerebrated and SPFI injected 89 models, the test connectors are
located on the engine side/driver's side of the firewall.

Dang spellchecker...
# On carbureted and SPFI injected 89 models, the test connectors are located
on the engine side/driver's side of the firewall.