recently pulled and rebuilt the motor, runs fine with no issues other than a cel referencing 2 instances of the same dct “keyless entry system: b2113, possble driving signal abnormal” , which under further investigation is a code for a Subaru diesel which mine is not. engine runs with no other issues than this, if anyone has any advice or has delt with a similar issue I would appreciate some help.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
2007 na legacy persistent cel with code b2113
- Thread starter TCfive
- Start date
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.
Similar Threads
Forum statistics
Latest Threads
-
Speed that oil drai from the filter back thru the pump to sump?
- Started by scubazteve
-
2018 Outback with excessive battery drain
- Started by MSDS
-
Block off line from manifold to purge valve
- Started by angeloj198
-
Brake Light Adjustment
- Started by gbsk
-
Thumping sound when wheel is turned hard in either direction.
- Started by Frank54
-
Rear hatch Light Switch
- Started by junkyardhz
-
Headlights
- Started by Flip
-
Blank (switch) beside parking lever/switch
- Started by semag93
-
2019 Forester have a timing belt or a timing chain
- Started by Dianne
-
Trunk open Wire color and location 2025 subaru Forester Sport
- Started by bmay10