Recently got a 2011 subaru legacy 2.4 and the heat only works on the driver side, mechanic flushed the heater core but the only change is intensity of the heat. Otherwise it still no heat on the passenger side. And as of today I've got no low beams whatsoever. Tried the fuses, nothing, bulbs this morning before I went to work, nothing, relay, nothing. Any ideas?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
2011 Legacy issues.
- Thread starter Maxwell
- Start date
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.
Similar Threads
Forum statistics
Latest Threads
-
Speed that oil drai from the filter back thru the pump to sump?
- Started by scubazteve
-
2018 Outback with excessive battery drain
- Started by MSDS
-
Block off line from manifold to purge valve
- Started by angeloj198
-
Brake Light Adjustment
- Started by gbsk
-
Thumping sound when wheel is turned hard in either direction.
- Started by Frank54
-
Rear hatch Light Switch
- Started by junkyardhz
-
Headlights
- Started by Flip
-
Blank (switch) beside parking lever/switch
- Started by semag93
-
2019 Forester have a timing belt or a timing chain
- Started by Dianne
-
Trunk open Wire color and location 2025 subaru Forester Sport
- Started by bmay10