I was washing the car and noticed the bumper fender joint has become detached. Any ideas as to how this joint is held together? The car has not bumped into anything on the front end. I am thinking there might be some plastic clips behind the fender liner which could be popped back in place, maybe never properly clipped from the factory.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Bumper Fender joint problem
- Thread starter Mcgiiver
- Start date
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.
Similar Threads
Forum statistics
Latest Threads
-
Wiper blades
- Started by Dcook
-
P0519
- Started by lawrence7711
-
Parts
- Started by StancedLegacy123
-
Tinny rattle
- Started by bajatex
-
2002 outback rapid power loss
- Started by PToutback
-
USB Flash Drive Details for 2024 Crosstrek Wilderness
- Started by lenk
-
Subaru fa/fb series camshaft timing issue
- Started by Ken43
-
Steering slippage
- Started by Jagaba
-
Buying subaru
- Started by Jmdsubout
-
2024 Outback & Car Play - no Messages Notification or Maps Audio
- Started by zeushead01