Australian 2001 OBW keyless entry

  • Thread starter Daniel Thrombin
  • Start date
D

Daniel Thrombin

Does anyone know the process for reprogramming the remote key?

I've seen a lot of information relating to the North American model
incorporating an alarm but the Aussie model uses a different (remote) key
and different programming sequence which I am informed is based on joining a
normally open one-wire connector behind the driver's side kick panel.


Thanks
 
Does anyone know the process for reprogramming the remote key?
I've seen a lot of information relating to the North American model
incorporating an alarm but the Aussie model uses a different (remote) key
and different programming sequence which I am informed is based on joining
a
normally open one-wire connector behind the driver's side kick panel.

Ring up a dealer and ask, or find out how much they charge to do it for you.
Then call an auto electrician and ask if they can do it and how much.

-mark
 
Daniel said:
Does anyone know the process for reprogramming the remote key?

I've seen a lot of information relating to the North American model
incorporating an alarm but the Aussie model uses a different (remote) key
and different programming sequence which I am informed is based on joining a
normally open one-wire connector behind the driver's side kick panel.


Thanks
you might find instructions here;
www.cars101.com

Carl
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Members online

Forum statistics

Threads
13,973
Messages
67,596
Members
7,464
Latest member
PilotK

Latest Threads

Back
Top