91 Loyale SW - 4WD problem

S

Subi

I recently purchased a 1991 Subaru Loyale Manual Stationwagon. At the time of purchase, pressing the 4WD button on the stick turned on the 4WD. When I tried to turn on the four wheel drive again, after driving it back to my house about an hour and a half away, it did not work. I've tried it repeatedly but it will not work. Does anyone have any idea what the problem may be? Thank you.
 
Subi said:
Does anyone have any idea what the problem may be? Thank you.

Hi,

Any chance you were looking under the hood and bumped anything? The 4wd
unit is activated by a vacuum hose, located on the right (passenger)
side of the engine compartment. It goes toward some kind of vacuum
accumulator up close to the firewall. If it gets knocked off (not that
hard to do--don't ask how I know!), the 4wd won't engage. If that's not
it, check all the electrical connections in the area of the
gearbox--take out the spare tire and there are a couple easily
visible--to make sure they're clean and tight. And, of course, check the
fuse box for loose, missing or burnt fuses. Hopefully you won't have to
dig any deeper.

HTH,

Rick
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Members online

No members online now.

Forum statistics

Threads
15,327
Messages
72,789
Members
8,967
Latest member
trykflyr

Latest Threads

Back
Top