Need some help. I've got a 1998 Subaru Legacy wagon 2.2. The brights on the headlight switch work in the flash mode but not in the continuous on mode. I suspect it's the switch as I've checked all associated fuses and relays and they're good. I've also replaced the bulbs. As I understand it, on this model the entire switch harness must be replaced and not just the module. There's not a shred of info on the interweb about how to do this. I've removed the airbag and the steering wheel at this point. Anybody have any experience with this and can direct me on what to do next? Thanks in advance.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Light/Signal Combo Switch 1998 Subaru Legacy
- Thread starter ParsonMac
- Start date
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.
Similar Threads
Forum statistics
Latest Threads
-
Turning off Radio
- Started by maplewood
-
My Subaru App
- Started by Sailorman3
-
NEW. 2017 Subaru legacy sport
- Started by Showell13
-
Service bulletin (Reprogramming to Optimize ECM for Improved Battery Life).
- Started by integrator
-
Entertainment system with USB
- Started by Jeff_from_the_North
-
Center console removal
- Started by Atrafford
-
Lock icon on dash flashes
- Started by peteekstrand
-
Launch and load boat w/'23 outback 2.4
- Started by subarujosh
-
2015 Subaru Impreza New Transmission Issue
- Started by jclepape