Engine light after audio install

J

Jeremy Bremser

Joined
May 13, 2018
Messages
2
Reaction score
0
I have a 2015 Impreza. I installed a Kicker sub. After hooking everything up my amp started to get hot so I disconnected all of my audio cables from the battery. An hour later I started my car to drive home and I noticed my check engine light was on and my cruise control is blinking. With the car started I got on the gas pedal and the engine did not react accordingly.

My amp got hot due to my placement and not due to my wiring.

I have disconnected my battery two or three times for long periods of time hoping to reset the check engine light and I have been unsuccessful with every attempt.

This is my first time on the forum. Can anyone help me with my issue? Please
 
I have had a chance today to work on the car.

I have taken an obd2 to the car and I pulled 1 engine code.
P2102

Does anyone have any ideas.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

1995 Subaru Legacy with check engine light on 1
Check Engine Light 1
Check Engine, Hill-Hold, and Vehicle Dynamics lights come on simultaneously 0
2001 outback steady check engine light 0
Check Engine Light and Odd Alternating Dash Lights 1
Brake, check engine, cruise control lights blinking 3
Diagnosing persistent issues with A/C and check engine lights 0
Check engine light on 2022 Subaru Forester Touring 1

Members online

No members online now.
Total: 56 (members: 0, guests: 56)

Forum statistics

Threads
13,951
Messages
67,526
Members
7,429
Latest member
VNik5876

Latest Threads

Back
Top